2022-07-05
Application introduction of "Ojiwei" dehumidification defoamer
Plastic products include injection molding, extrusion and blown film processing, which are prepared by high-temperature melting and bridge-out molding of raw materials. There is a direct and close relationship between the compactness of plastic products and the defects. The moisture contained in raw materials such as plastic products will directly affect the quality of plastic products.
The amount of water will evaporate during the high-temperature molding process to form water vapor. There are defects such as air bubbles and micro-holes in Daojing Plastic products, which directly affects the
Mechanical properties and appearance quality of plastic products.
In order to improve the quality of plastic products and remove moisture from raw materials such as plastics, according to the actual situation, our professional scientific research and technical personnel have been working for several years.
Elaborate research, repeated experiments, and finally overcome the mysterious plastic processing problems, R & D and production can be widely used in the plastic processing industry, rubber processing industry
The powerful new product "Aojiwei" dehumidification and defoaming agent in wet defoaming. Recently, the method of heating and drying rubber and plastic raw materials is mainly adopted.
Before removing the moisture of the raw materials, this process requires the rubber products manufacturers to add additional high-temperature drying equipment and increase the processing procedures of rubber and plastic products.
Strong dehumidification and water absorption: dehumidification performance
Ease of application and processing: widely applicable used in plastic processing equipment without modification
Excellent environmental protection: plasticizing performance. Excellent, non-irritating, non-toxic ingredients.
Application Guide
■Recommended dosage in product processing: 1%-5%. According to the moisture content of the raw materials,Adjust the addition ratio, plastic raw materials and The filler does not need to be dried.
■The processing technology of plastic products does not need to be changed.
■Plastic dehumidification masterbatch should be sealed and stored,It should be used immediately after opening to prevent moisture absorption failure.
"Aoqiwei" plastic dehumidification and defoaming agent is a high-tech product developed by our factory carefully organized by professional scientific research and technical personnel. It is used in plastic and rubber processing.
A new type of functional masterbatch that removes moisture, eliminates bubbles and micropore defects in the process, and adds this plastic masterbatch to reduce raw material drying and other processes in rubber and plastic processing.
Reduce the cost of rubber and plastic products, improve productivity, and greatly improve the comprehensive mechanical properties and appearance quality of rubber and plastic products, which are widely accepted by the rubber processing industry.
The user's high praise can really be described as: "infinite mystery, magical special effects, and great power."
"Aoqiwei" new type of rubber dehumidifier and defoamer is non-toxic, non-polluting, and does not affect the performance of rubber and plastic products. It is a special technology introduced by our company.
Self-developed high-tech products with independent intellectual property rights can strongly absorb PE, PP, PVC, PS, LDPE, Moisture in ABS, PH and engineering plastics and rubber products can be used in degradable plastics, recycled plastics, plastic additives, dyes, fillers and rubber applications.
It can improve the quality and yield of rubber and plastic products, significantly improve production efficiency and reduce energy consumption.
Meishan Ao Chuangxin Materials Co., Ltd. was established on July 12, 2018. Its registered office is located on the first floor of the Office Building of the Management Committee of Jinxiang Chemical Industrial Park, Jinxiang Avenue, Dongpo District, Meishan City, Sichuan Province. The legal representative is Liu Tianzhong. The business scope includes production and sales of plastic filler masterbatch, plastic defoamer and plastic modification, and sales of various plastic injection agents. (For projects subject to approval according to law, business activities can only be carried out after approval by relevant departments.) Meishan Ao Chuangxin Materials Co., Ltd. has invested in 1 company.
Dou Jiangang
jghd5041@gmail.com
207076352@qq.com
